Hey everyone! If you are anything like me, you probably spend way too much time scrolling through forums, Instagram reels, and automotive marketplaces late at night, dreaming up ways to make your car look a little more aggressive. For me, that obsession revolves around my 2017 Chevrolet Corvette C7 Stingray. It is a fantastic machine straight from the factory, but let’s be real—the base aero package leaves a lot to be desired if you want that track-ready, wide-stance look without shelling out Z06 or ZR1 money at a dealership.
A few months ago, I finally decided to pull the trigger on some carbon fiber upgrades. After digging through dozens of threads and asking around local car meets, one name kept popping up over and over again: the extreme online store. People were talking about their splitter packages, side skirts, and rear spoiler upgrades like they were the holy grail of aftermarket styling—good quality, decent fitment, and prices that didn’t require me to take out a second mortgage.
Still, I was skeptical. I’ve ordered cheap body parts off random websites before, only to spend three hours with a Dremel tool and a heat gun trying to make a fiberglass lip fit a bumper it was supposedly molded for. Spoiler alert: it never ends well. So, before spending my hard-earned cash, I wanted to figure out if this brand lived up to the hype, or if it was just another drop-shipping storefront selling flimsy plastic.
In this write-up, I am going to walk you through my entire journey with the extreme online store, from the moment I clicked the checkout button to the final bolt being tightened in my garage. Let’s dive right in.
Why I Decided to Upgrade My C7’s Aero
To give you some background, my C7 is my weekend cruiser and occasional autocross toy. While the factory front end looks sleek, it always felt a bit naked down low. I wanted a front splitter that gave it that low-slung, menacing appearance, paired with matching side skirts to tie the whole profile together. If you own a Corvette, you already know that rock chips along the rear quarter panels are a nightmare. Wide side skirts act as a functional barrier against flying debris kicked up by the front tires, which was a massive selling point for me.
I started browsing the web for options. OEM carbon fiber parts from GM cost an absolute fortune—we are talking thousands of dollars for a couple of pieces of molded weave. On the flip side, unbranded eBay specials were tempting at $150, but the reviews always mentioned wavy carbon weaves, poor clear coat that yellows in the sun, and pre-drilled holes that didn’t line up with the factory mounting points.
That is when I landed on the catalog over at the extreme online store. They specialized heavily in American muscle and sports cars, particularly Corvettes, Mustangs, Camaros, and Chargers. Their selection ranged from Z06-style stage conversions to aggressive high-wing spoilers and Wicker Bill extensions. The pricing sat comfortably in that sweet spot—not dirt cheap, but way more affordable than factory original parts.
Navigating the Catalog and Placing the Order
Their website layout is pretty straightforward. You pick your make, model, and year, and it filters down to parts that actually fit your specific trim. For my 2017 Stingray, I ended up bundling a Z06-style front splitter, matching side skirts, and a low-profile rear spoiler finished in carbon flash metallic (since I wanted a contrast to my shark gray paint without going full exposed carbon fiber).
Checkout was painless, and I got a confirmation email right away. Shipping did take a little bit of waiting, but that is to be expected with oversized body panels that require freight or specialized large-box carriers. My packages arrived about a week and a half later. Everything was strapped down tightly inside heavy-duty cardboard tubes and wooden reinforcement frames. Unboxing it was like opening a Christmas present; I spent the first ten minutes just inspecting the finish to see if there were any scratches or imperfections in the clear coat. Thankfully, it looked pristine.
The Installation Process: Garage DIY or Nightmare?
I am a stubborn DIYer. Unless an engine pull or transmission drop is involved, I prefer to work on my own cars in my two-car garage. Naturally, I decided to tackle the aero kit myself over a Saturday afternoon, armed with a floor jack, a jack stand, a cordless drill, a metric socket set, and a whole lot of blue painter’s tape.
Installing the side skirts first was actually surprisingly easy. The factory rock guards came off easily, and the new side skirts used a combination of factory screw locations underneath the rocker panels along with some heavy-duty rivets. Pro tip: having a second set of hands to hold the middle of the side skirt while you line up the first few screws makes life infinitely easier. I managed with some strategically placed painter’s tape, but a buddy would have saved me ten minutes of frustration.
The front splitter was a bit more nerve-wracking. You have to get the front end of the car up high enough to comfortably work underneath the bumper. Once jacked up safely, I removed the factory undertray bolts, positioned the new splitter, and checked the alignment. This is usually where aftermarket parts fail, but to my pleasant surprise, every single pre-drilled hole lined up cleanly with the factory bumper clips and underbody mounting points. I didn’t have to drill any new holes into visible painted surfaces, which gave me immense peace of mind.
Real Customer Feedback and Community Consensus
Before buying, I didn’t just rely on my own research; I spent hours reading what other owners had to say across various enthusiast forums. Here is a snapshot of typical feedback floating around the community regarding their experience with these parts:
“I ordered a ZL1 1LE style wing and front splitter for my Camaro SS, and I was genuinely blown away by how well the carbon flash metallic matched my factory paint code. Fitment was about a 9 out of 10, needing just a tiny bit of pushing into place, but once bolted down, it looked completely OEM.” — Marcus T., California
“Customer service was solid when one of my end caps arrived with a slight scuff on the edge from shipping. They sent a replacement part out within three days no questions asked. Definitely buying my rear diffuser from them next.” — Sarah L., Florida
“If you want that aggressive track look without spending dealership prices, this is the way to go. The carbon fiber weave has no warping or weird stretching around the curves. Highly recommend getting a friend to help with the front splitter install though!” — David K., Ohio
“Been running their side skirts and front lip on my C7 for over a year now through highway commutes and spirited canyon runs. No cracking, no loose hardware, and it still shines up great after a ceramic coat.” — Elena R., Texas
Quality, Durability, and Long-Term Wear
It has been about six months since I bolted everything up to my Corvette, and the car has seen plenty of highway miles, road trips, and weekend drives since then. How are the parts holding up?
First off, rock chips. As I mentioned earlier, the wider side skirts take the brunt of the abuse. Looking underneath them now, I can see a few tiny white specks where small pebbles hit the underside flange, but the carbon flash finish has resisted cracking or splintering entirely. The front splitter sits pretty low—I have to back into driveways at a sharp angle to avoid scraping—and while I have lightly brushed the underside twice on steep concrete transitions, the heavy-duty plastic composite underneath has absorbed the impact without snapping.
The clear coat has also held up remarkably well against the scorching summer sun. I keep my car parked outside under a carport, and I haven’t noticed any yellowing, fading, or cloudy spots on the finish. A good coat of automotive sealant every few months keeps it looking brand new.
Pros and Cons Based on My Hands-On Experience
No product review is complete without looking at both sides of the coin. Here is my breakdown of what works and what could be improved:
The Good:
- Precise Fitment: Unlike generic eBay parts, these actually line up with factory mounting points.
- Price-to-Value Ratio: Dramatically cheaper than OEM factory parts while maintaining a high-end visual appearance.
- Finish Quality: The carbon flash metallic paint and carbon fiber weaves look clean, deep, and uniform.
- Dedicated Selection: Huge variety of parts specifically tailored for American performance cars like Corvettes, Mustangs, and Camaros.
The Bad:
- DIY Patience Required: Installing splitters and side skirts takes time, patience, and proper jack stands. It’s not a five-minute plug-and-play job.
- Shipping Times: Because of the size of these aero parts, freight and large-box shipping can take a bit longer than standard Amazon Prime orders.
Final Verdict: Is It Worth Your Money?
If you are looking to transform the exterior of your sports car without emptying your savings account on original manufacturer equipment, checking out the extreme online store is a solid move. My experience from unboxing to installation and long-term daily driving has been overwhelmingly positive.
My C7 looks lower, wider, and much more aggressive now, and I get compliments at nearly every gas station stop and local meet I attend. If you are handy with basic garage tools and want to give your ride that custom track-ready aesthetic, you won’t be disappointed.
Ready to upgrade your own ride? You can check out their full catalog, find parts specific to your vehicle make and model, and see what catches your eye by visiting Visit Official Website Now.